Splave (US) Wins GIGABYTE March Madness Contest, plus Prize Draw Winners
The first GIGABYTE sponsored contest of 2017 came to a close just a few days ago on OC-ESPORTS. At the end of a month long contest that attracted some of the world’s most potent overclocking talent, we find US overclocker Splave sitting at the top of the table. In second place we have World Champion 2016 marc0053 from Canada, while in third place we find Belgian legend leeghhofd. Let’s take a look at all the scores from the contest, the $2,500 USD prize pool on offer and the lucky prize draw winners.
GIGABYTE March Madness: March 1st to 31st, 2017
The March Madness contest from GIGABYTE, was open to Overclockers from all leagues on HWBOT. It spanned four individual stages with benchmarks chosen with the emphasis on CPU and memory performance. To make things more interesting and reduce the effects of the silicon lottery, the contest implemented a frequency cap of 5,003MHz. This meant that competing Overclockers had to find ingenious ways to tweak their systems beyond simply pushing CPU frequency. In terms of hardware restrictions, it was all pretty simple; any single-core, dual-core or quad-core processor on any GIGABYTE motherboard. The following benchmarks were chosen for each of the four stages.
Contest Stages and Benchmarks
- Stage 1: 3DMark Time Spy Physics
- Stage 2: Geekbench3 (Multi Core)
- Stage 3: X265 1080P
- Stage 4: Intel XTU
Stage 1: 3DMark Time Spy Physics
In Stage 1 overclockers were tasked with squeezing as much performances from their system to score as highly as possible in the 3DMark Time Spy benchmark, using the Physics score. Splave made his mark here, earning a first place finish with a score of 6,978 marks. The score was made using an Intel Core i7 7700K and a G.SKILL Trident Z DDR4 kit configured at 1,834.8MHz (13-13-13-28).
Here’s a great shot of the rig used by Splave which is based around an GIGABYTE Z270X-Gaming K7 motherboard:
Second place goes to marc0053 with a score of 6,962 marks while Germany’s Nik arrived in third place with 6,911 marks. Check out the Stage 2 contest table below:
You can check out the Stage 1 contest page here:
Stage 2: Geekbench 3 (Multi-Core)
In Stage 2 of the contest we turn to the Geekbench 3 Multi-Core benchmark. Once again the fastest overclocker proves to be that man again… Splave took first place with a score of 22,506 points. On this occasion he configured his G.SKILL DDR4 kit to 1972.1MHz using 12-12-12-28 timings. In second place we find marc0053 is the bride’s maid again, arriving in second place with a score of 22,501 points, while in third place leeghoofd makes an entrance on the scene with a score of 22,385 points.
The rig shot below comes from marc0053 and is also based on a GIGABYTE Z270X-Gaming K7 board:
Here’s the Stage 2 table:
Find the the Stage 2 contest page here:
Stage 3: x265 1080p
The HWBOT in-house developed x265 benchmark and its 1080p preset is the focus in Stage 3. This time the Belgian master leeghoofd makes a big splash with an outstanding score of 42.76 fps, quite a bit ahead of Splave who managed a score of 42.73 fps. Leeghoofd used a GIGABYTE Z170X-SOC Force board with his G.SKILL Trident Z DDR4 kit pushed to 2,012.4MHz (12-12-12-28). Third place goes to Indonesia’s IvanCupa who managed a score of 42.7 fps.
Here’s a rig shot from Nik of Germany who also opted to use a GIGABYTE Z170X-SOC Force motherboard:
Here’s the Stage 3 table:
The Stage 3 contest page can be found here:
Stage 4: Intel XTU
In the final Stage we’re focusing on the Intel XTU benchmark. The scoring was a little odd however with all submissions earning one point, regardless of score. For what it’s worth we find marc0053 finally arriving in top spot with a score of 1,787 marks. Nik arrives in second place with 1,785 marks while Splave has to make do with 1,783 marks and third place.
Here’s the Stage 4 table at the end play:
The Stage 4 contest page is right here:
GIGABYTE March Madness: Final Standings
At the end of the month we find Splave in a commanding position at the top of the table with 149 points. Marc0053 arrives in second place with 141 points while leeghoofd makes third spot with a haul of 139 points. Here’s the table at the end of the contest:
A total of 60 overlockers took part in the contest, which might not seem the highest participation numbers for an OC-ESPORTS contest. The GIGABYTE March Madness contest did however involve some the biggest names in overclocking with several of the world’s top Elite players taking part. This is great to see.
A big thanks to all the overclockers who took part, and also to GIGABYTE for their valued support. We leave you with a mouth watering look at the great prizes that GIGABYTE are sending the contest winners. These winners also include Prize Draw winners, so if you took part, take a look. You might still be a winner.
1st Place: Splave (US)
- GIGABYTE AORUS Z270X-Gaming 7 ($239.99 USD)
- Intel Core i5-7700K ($349.99 USD)
- GIGABYTE Radeon RX 480 WINDFORCE 8GB ($239.99 USD)
2nd Place: Marc0053 (Canada)
- GIGABYTE AORUS Z270X-Gaming 7 ($239.99USD)
- Intel Core i5-7600K ($239.99 USD)
- G.SKILL Trident Z Series 16GB (2 x 8GB)DDR4 3600 Memory($159.99 USD)
3rd Place: Leeghoofd (Belgium)
- GIGABYTE Z270X-UD3 ($149.99 USD)
- Enermax Liqtech 240 All-in-One Liquid Cooler ($240.49 USD)
- Enermax Platimax 850W ($169.99 USD)
Lucky Draw Prizes
- GIGABYTE AORUS Z270X-Gaming 7 ($239.99 USD) - Hippo (Germany)
- G.SKILL Mouse or Keyboard ($129.99USD) - skulstation (Belgium)
- Open Benchtable ($149.99 USD) - subaruwrc (Hungary)
- 5x Heroes of the Storm Kerrigan Hero & Succubus Skin Codes ($10 each) - Lochekey (US), aerotracks (Germany), Nik (Germany), Clingon (Australia) and disputes1 (UK)
- 1x $50 USD Steam Wallet Code - Doublepi (Germany)
